Wireless Access

Reply
Occasional Contributor I
Posts: 9
Registered: ‎01-13-2012

AP125 Radio LED stays Amber

Problem: AP125 has the b/G and N Radio LEDs flashing Amber it could mean the following:

Amber: radio not configured for HT

If HT is configured, then check the 802.11 Security under the SSID Profile and check the Network Authentication Mixed Mode and you will get the Amber LEDs flashing if the security was set to dynamic-wep

 

Does anyone else or has anyone else had this problem?

Regular Contributor I
Posts: 177
Registered: ‎10-05-2011

Re: AP125 Radio LED stays Amber

[ Edited ]

If they are flashing, the AP is setup as an Air Monitor (AM) 

Regular Contributor I
Posts: 177
Registered: ‎10-05-2011

Re: AP125 Radio LED stays Amber

If a device is an AM on both or either band, the band light will be blinking no?

 

Aruba Employee
Posts: 63
Registered: ‎10-12-2010

Re: AP125 Radio LED stays Amber

yes thats correct.

Search Airheads
Showing results for 
Search instead for 
Did you mean: