Wireless Access

Reply
Occasional Contributor II
Posts: 21
Registered: ‎06-12-2013

AP125 not showing up on dashboard/controller

My AP125 shows as an UP status on "All Access Points" but it does not show up on the Controller Access Point page and therefore on the dashboard I do not see its WLAN or Antennas.

 

Any ideas on how to fix this? I have tried provisioning the AP but that doesn't change anything. 

 

Thanks,

Alvin 

Guru Elite
Posts: 21,499
Registered: ‎03-29-2007

Re: AP125 not showing up on dashboard/controller

That is because "all access points" show all access points that are connected to all controllers.

Controller> Access points only shows access points connected to that physical controller.

According to "all access points" your access point is physically connected to the local controller with the ip address  192.19.26.200



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II
Posts: 21
Registered: ‎06-12-2013

Re: AP125 not showing up on dashboard/controller

Right but those screenshots were taken on the console for the local controller, 198.19.26.200, where the AP is plugged into the first port. 

Guru Elite
Posts: 21,499
Registered: ‎03-29-2007

Re: AP125 not showing up on dashboard/controller

[ Edited ]

If you only have a master controller, it should show up in both places.  If you were looking from the management page of the local controller there would be a "Master Controller" tab, and I don't see that in either screenshot.  Are you saying that you are logged into the 192.168.26.200 controller?



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II
Posts: 21
Registered: ‎06-12-2013

Re: AP125 not showing up on dashboard/controller

Yes, I only have an AP125 and XM3200 in my lab and I am logged into the only controller (master) on 198.19.26.200

Search Airheads
Showing results for 
Search instead for 
Did you mean: