AOS 6.1.3.7.
Interface Information
---------------------
Inter-| Receive | Transmit
----------------------------------------------------------------------------
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed reset
lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth1:1625653911 15425530 0 0 0 0 0 0 312520437 1179754 0 0 0 0 0 0 0
------------
Ethernet Duplex/Speed Settings
------------------------------
Autoneg Speed (Mbps) Duplex Iface
------- ------------ ------ -----
on 10 Half eth0
on 100 Full eth1
------------------------------------
atapath Application Statistics
-------------------------------
NAPT Allocation Failures 0
NAT Allocation Failures 0
NAT TCP Sequence Failures 0
ICMP Errors Received 1848
ICMP Errors Denied 0
ICMP Errors Fragmented 0
ICMP Errors Generated 0
The customer has installed this AP and used eth1 to patch it into their 100Mbps PoE switch.
There are no details regarding the rx errors on the customers switch.
I've set one of their AP135's ethernet settings to 100Mbps full duplex to see if there are auto negotiate issues.
What would you guys recommend?
Use eth0 for starters?
Cheers
James