Wireless Access

We really would like to have a wall-mount bracket for the AP205H that allows it to be flush to the wall and powered from the e0/pt port. which means, we need a wall-mount bracket that is thick enough to allow the space of the jumper ether cable from the back and have the AP mounted flush to the wall, wihout using a third party wiremold adapter. (such as panduit and others).

In the box of the AP205H is the AP, and the singlegang box adapter (that is not thick enough to allow the ethernet jumper cable in the back) to be mounted flush to the wall.

in the AP205H-MNTR comes the desk mount, which has a curvy back, cannot be mounted to the wall and the Ethernet Jumper cable.

We're actually looking into this, but you're right that wall mount is currently not (really) supported. You could use a surface mount box from companies like Panduit and attach the AP with single-gang bracket on top of that, but it's not very clean.

What we're considering is a simple spacer that would create enough clearance to use the jumper that we currently ship with the AP-205H-MNTR kit.

Please check back within 1-2 months.

/Onno Harms, HPE Aruba PLM

that is Awesome.

Did not even anticipate someone looking at my post, nonetheless the PLM.  i'm flattered.

This is why Aruba is such a great company.

Hi,

Is there a solution for this now? We have a client that also wants the extra space! 

thanks 

Not for the 205H.

However, for the new 303H we're offering the AP-303H-MNTW wall mount kit.