Dear,
We have AP225s that are connected with both ports on an Alcatel OS6450-P24 switch. When we plug in the AP port by port, there is no problem, the AP is getting power and booting fine.
When the switch needs to reboot (due to an upgrade of the switch for example) the AP is not getting any power afterwards.
When we disconnect 1 of the 2 ports, the switch is getting power on the other port which is still connected and boots fine again, after it gets his power on that port, we can connect the other port again.
So it seems the switch does not know on which of the 2 ports he need to deliver power.
I tried the same on an Alcatel OS6850-P24X and I have the same issue.
Any idea? Somebody who has the same issue?
Kind regards,
#AP225