Can anyone please tell me, how to set the wpa passphrase for a single SSID using the CLI (SSH)?
What I did:
myap# configure
myap (config) # wlan ssid-profile MyProfile
myap (SSID Profile "MyProfile") # enable
myap (SSID Profile "MyProfile") # wpa-passphrase myverystrongpassphrase
myap (SSID Profile "MyProfile") # exit
myap (config) # exit
myap# save memory
myap# exit
What I got:
myap# show run no-encrypt
[ ... ]
wlan ssid-profile MyProfile
enable
index 0
type employee
essid MyProfile
wpa-passphrase ThisIsTheOldPassphrase
opmode wpa2-psk-aes
max-authentication-failures 0
vlan 40
auth-server InternalServer
rf-band all
captive-portal disable
dtim-period 1
inactivity-timeout 1000
broadcast-filter arp
dmo-channel-utilization-threshold 90
local-probe-req-thresh 0
max-clients-threshold 64
dot11r
dot11k
dot11v
[ ... ]
So nothing changed at all. :-(
Still the old Passphrase.
Anyone here who can help me with this?
Brest regards,
Alex