Wireless Access

Reply
Occasional Contributor I

APIN 0205: Set WPA Passphrase for single SSID using CLI

Can anyone please tell me, how to set the wpa passphrase for a single SSID using the CLI (SSH)?

 

What I did:

 

myap# configure
myap (config) # wlan ssid-profile MyProfile
myap (SSID Profile "MyProfile") # enable
myap (SSID Profile "MyProfile") # wpa-passphrase myverystrongpassphrase
myap (SSID Profile "MyProfile") # exit
myap (config) # exit
myap# save memory
myap# exit


What I got:

 

myap# show run no-encrypt
[ ... ]
wlan ssid-profile MyProfile
 enable
 index 0
 type employee
 essid MyProfile
 wpa-passphrase ThisIsTheOldPassphrase
 opmode wpa2-psk-aes
 max-authentication-failures 0
 vlan 40
 auth-server InternalServer
 rf-band all
 captive-portal disable
 dtim-period 1
 inactivity-timeout 1000
 broadcast-filter arp
 dmo-channel-utilization-threshold 90
 local-probe-req-thresh 0
 max-clients-threshold 64
 dot11r
 dot11k
 dot11v
[ ... ]

So nothing changed at all. :-(

 

Still the old Passphrase.

 

Anyone here who can help me with this?

 

 

Brest regards,

Alex

Guru Elite

Re: APIN 0205: Set WPA Passphrase for single SSID using CLI

You need to use "commit apply" instead of save mem


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Guru Elite

Re: APIN 0205: Set WPA Passphrase for single SSID using CLI

You need to use "commit apply" instead of save mem


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor I

Re: APIN 0205: Set WPA Passphrase for single SSID using CLI

Thx a lot for this very fast and helpful answer!

 

You made my day.

 

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: