Hello,I have 2 APs Aruba 103 configured with the same SSID in the same network. The devices connected to the wifi start flapping betwen the two APs every 30 seconds. The devices are static, i mean they don´t move around the room.
Any solution for this flapping?
Thank you in advice.
Are these APs too close tot each other?
What type of client are you using ?
About 25 - 30 meters.
What type of clients are you using ?
Are these IAP or Campus APs?
The clients are barcode pistols and industrial label printers.
The APs are in IAP.
The power on your IAPs may be too high
I would try decreasing the power ,do you have ClientMatch on ?
Do you know what's the power set on those devices ? you probably want to match it
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.