Wireless Access

Reply
Occasional Contributor II
Posts: 16
Registered: ‎08-26-2014

APs are up, no SSID showing...

Trying to get a 3600 controller going with a handful of AP-135 for a conference (I'd normally just use Instant but didn't have IAPs available to me for this gig). Internet access and DHCP are being provided by an external pfSense router due to DHCP limitations imposed by the controller. 

 

VLAN 1: Management network, 172.16.0.0/24

VLAN 99: Guest network, 10.99.0.0/22

 

Currently have the 3 APs up, but I can't seem to get the SSIDs to show up. I'm sure I'm missing something trivial here, but I'm about to go bald from tearing my hair out trying to get this to work. 

 

In the web UI monitoring tab, under "WLAN" it shows "No SSIDs found". 

Under the configuration tab, under AP configuration, I'm showing the SSIDs under the Virtual AP.

 

 

Guru Elite
Posts: 20,816
Registered: ‎03-29-2007

Re: APs are up, no SSID showing...

Type "show profile-errors" on the commandline


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II
Posts: 16
Registered: ‎08-26-2014

Re: APs are up, no SSID showing...

(Aruba3600) #show profile-errors

 

Invalid Profiles

----------------

Profile  Error

-------  -----

 

(Aruba3600) #

Guru Elite
Posts: 20,816
Registered: ‎03-29-2007

Re: APs are up, no SSID showing...

Try "show ap bss-table" to see if any access points are broadcasting. Then type "show ap database"


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II
Posts: 16
Registered: ‎08-26-2014

Re: APs are up, no SSID showing...

(Aruba3600) #show ap bss-table


fm (forward mode): T-Tunnel, S-Split, D-Decrypt Tunnel, B-Bridge (s-standard, p-persistent, b-backup, a-always), n-anyspot


Aruba AP BSS Table

------------------

bss ess port ip phy type ch/EIRP/max-EIRP cur-cl ap name in-t(s) tot-t mtu acl-state acl fm

--- --- ---- -- --- ---- ---------------- ------ ------- ------- ----- --- --------- --- --


Channel followed by "*" indicates channel selected due to unsupported configured channel.

"Spectrum" followed by "^" indicates Local Spectrum Override in effect.


Num APs:0

Num Associations:0


(Aruba3600) #show ap database


AP Database

-----------

Name Group AP Type IP Address Status Flags Switch IP Standby IP

---- ----- ------- ---------- ------ ----- --------- ----------

24:de:c6:c7:e1:58 default 135 172.16.0.12 Up 34m:23s I 172.16.0.2 0.0.0.0

24:de:c6:c7:e1:8a default 135 172.16.0.11 Up 34m:24s I 172.16.0.2 0.0.0.0

24:de:c6:c7:e2:8c default 135 172.16.0.13 Up 33m:58s I 172.16.0.2 0.0.0.0


Flags: U = Unprovisioned; N = Duplicate name; G = No such group; L = Unlicensed

I = Inactive; D = Dirty or no config; E = Regulatory Domain Mismatch

X = Maintenance Mode; P = PPPoE AP; B = Built-in AP; s = LACP striping

R = Remote AP; R- = Remote AP requires Auth; C = Cellular RAP;

c = CERT-based RAP; 1 = 802.1x authenticated AP; 2 = Using IKE version 2

u = Custom-Cert RAP; S = Standby-mode AP; J = USB cert at AP

i = Indoor; o = Outdoor

M = Mesh node; Y = Mesh Recovery


Total APs:3
Guru Elite
Posts: 20,816
Registered: ‎03-29-2007

Re: APs are up, no SSID showing...

Do you have a virtual ap configured in the default ap group?


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II
Posts: 16
Registered: ‎08-26-2014

Re: APs are up, no SSID showing...

As near as I can tell, yes.
Occasional Contributor II
Posts: 16
Registered: ‎08-26-2014

Re: APs are up, no SSID showing...

AP group "default"

------------------

Parameter                                Value

---------                                -----

Virtual AP                               CMForum-vap_prof

Virtual AP                               DTL_Admin-vap_prof

802.11a radio profile                    default

802.11g radio profile                    default

Ethernet interface 0 port configuration  default

Ethernet interface 1 port configuration  default

Ethernet interface 2 port configuration  shutdown

Ethernet interface 3 port configuration  shutdown

Ethernet interface 4 port configuration  shutdown

AP system profile                        default

VoIP Call Admission Control profile      default

802.11a Traffic Management profile       N/A

802.11g Traffic Management profile       N/A

Regulatory Domain profile                default

RF Optimization profile                  default

RF Event Thresholds profile              default

IDS profile                              default

Mesh Radio profile                       default

Mesh Cluster profile                     N/A

Provisioning profile                     N/A

AP authorization profile                 N/A

Community Administrator
Posts: 2,254
Registered: ‎12-03-2013

Re: APs are up, no SSID showing...

Can you do:

 

#show ap-group "default"

 

Then  find the SSID profile name the do:

 

#show wlan ssid-profile "your SSID profile"

 

Then post back the results please.

 

 

CWNA, ACMP, Security +
Occasional Contributor II
Posts: 16
Registered: ‎08-26-2014

Re: APs are up, no SSID showing...

---------                                -----

Virtual AP                               CMForum-vap_prof

Virtual AP                               DTL_Admin-vap_prof

802.11a radio profile                    default

802.11g radio profile                    default

Ethernet interface 0 port configuration  default

Ethernet interface 1 port configuration  default

Ethernet interface 2 port configuration  shutdown

Ethernet interface 3 port configuration  shutdown

Ethernet interface 4 port configuration  shutdown

AP system profile                        default

VoIP Call Admission Control profile      default

802.11a Traffic Management profile       N/A

802.11g Traffic Management profile       N/A

Regulatory Domain profile                default

RF Optimization profile                  default

RF Event Thresholds profile              default

IDS profile                              default

Mesh Radio profile                       default

Mesh Cluster profile                     N/A

Provisioning profile                     N/A

AP authorization profile                 N/A

 

(Aruba3600) #show wlan ssid-profile "CMForum-vap_prof"

SSID Profile "CMForum-vap_prof" undefined.

Search Airheads
Showing results for 
Search instead for 
Did you mean: