Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

ARM Setting Poor Quality

This thread has been viewed 1 times

  • 1.  ARM Setting Poor Quality

    Posted Aug 25, 2017 12:00 PM

    I have a user remote user who keeps on complaining about poor performance on a RAP 3W.

     

    When I look at the peformance of the RAP it shows up as poor.

     

    I have ARM enabled on the SSID with the default  Channel of 70% for threshold and Channel Quality Wait time of 120 seconds. This AP never changes the channel.

     

    Is there something else I should be looking at like reducing TX  or RX power or should I change the default thresold or channel wait time to something elsePoor QualityPoor Quality



  • 2.  RE: ARM Setting Poor Quality

    EMPLOYEE
    Posted Aug 25, 2017 01:30 PM

    A Rap3 only has a single radio, and chances are, it is on 2.4ghz.  It could be that the 2.4ghz band at that location is poor and you don't have any good choices, period.

     

    Type "

    show ap monitor channel ap-name <name of ap>

    That will show you how the controller sees the RF around that AP.