Wireless Access

Reply
Occasional Contributor I
Posts: 5
Registered: ‎02-06-2017

ARM only for a and g in controller

Hello,

 

I have 2 Aruba 7030 controllers with ~60 AP 205 (802.11n/ac).

 

The problem is that in my controller, I can only change ARM for 802.11a and 802.11g (you can see it in the picture below).

 

Is there something I don't understand ?

 

Thank you

Guru Elite
Posts: 21,281
Registered: ‎03-29-2007

Re: ARM only for a and g in controller

802.11a and 802.11g should be considered the 5ghz and 2.4ghz spectrum, which are the only two bands that you have in wifi, whether it is 802.11ac or 802.11n.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor I
Posts: 5
Registered: ‎02-06-2017

Re: ARM only for a and g in controller

Thank you very much !

Search Airheads
Showing results for 
Search instead for 
Did you mean: