Wireless Access

last person joined: 16 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AWN-A200 unable to ping

This thread has been viewed 0 times

  • 1.  AWN-A200 unable to ping

    Posted May 02, 2014 12:33 PM

    Hi,

     I am using this for a simple lab setup and testing. I cannot get this to ping anything. below is my network config. I am new to aruba and not sure if there is anythign else really needed for this to work.

     

     

    setenv ipaddr 10.0.0.99

    setenv netmask 255.255.255.0

    setenv gatewayip 10.0.0.1

     

     



  • 2.  RE: AWN-A200 unable to ping

    EMPLOYEE
    Posted May 02, 2014 12:43 PM

    If ping does not work, switch the ethernet cable to a different port and try again.



  • 3.  RE: AWN-A200 unable to ping

    Posted May 02, 2014 12:46 PM

    Hi,

    The A200 only has one WAN, one LAN, and one Serial ports. I tried Lan already and nothing. I will give WAN a try.



  • 4.  RE: AWN-A200 unable to ping

    Posted May 09, 2014 12:09 PM

    I have both wan and lan connect to different ports and still cannot get it to ping anything is there another option for me to load an OS onto it? I purachsed this from ebay as a test box and dont know how to get an image on it.