01-10-2014 05:22 PM
The following are the recommended antennas for the 224 (from the ordering guide: http://www.arubanetworks.com/pdf/products/OG_AP-220.pdf)
Although other antennas may work with adapters; the ANT-2x2-5314 kit is only a 5GHz antenna; and the connector type is N-type x 2.; however the 224 is RP-SMA x 3. Unless somone has additional suggestions, I don't think it is a good match.
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX
01-10-2014 06:03 PM
Is possible install antennas the other vendor?
I need external antennas with the following characterized:
Band: 5.1 GHZ - 5.8GHZ
Gain: 14 dbi
01-13-2014 05:15 AM
The AP-ANT-93 is probably what you want, though it only has 20 degree beamwidth in both vertical and horizontal. You'll need the pigtail adapters as well to connect from N-type to RP-SMA.
If my post is helpful please give kudos, or mark as solved if it answers your post.
ACCP, ACMP, ACMX #294
01-13-2014 11:34 AM
To use single band antennas with AP-220 you need to cable to diplexer then cable form diplexer to single band antennas.
this part has been used by some customers to do this
Un used ports should be terminated with