Wireless Access

last person joined: 12 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Access Point not detected on Controller after Reboot and SSID not Broadcast

This thread has been viewed 4 times

  • 1.  Access Point not detected on Controller after Reboot and SSID not Broadcast

    Posted Feb 14, 2018 11:18 PM

    hi there,

     

    i want to ask about my access point that not show on my controller, but access point can be ping from controller, and yet controller not show it. what should i do now ? please advice

     

    Capture.PNGCapture2.PNGCapture3.PNGCapture4.PNG

     

     

    my current configuration is, i have 2 controller that connected throught vpn to another site, the another side is master1 and from my site is master2 (slave), 

     

     



  • 2.  RE: Access Point not detected on Controller after Reboot and SSID not Broadcast

    EMPLOYEE
    Posted Feb 15, 2018 03:36 AM

    Type "show ap database" to see if your access points have any flags.

    Type "show log system 50" to see if your access points have any errors.

    Type "show audit-trail" to see the last few changes that were made to the configuration on the master.