Wireless Access

Reply
Occasional Contributor I

Accessing HP 5412zl by console

I faced problem that i cannot access the switch by console because i dont Know the password , so how i can delete console password without loosing the configuration.and what is the default password .

thanks..

 

Occasional Contributor II

Re: Accessing HP 5412zl by console

With a paperclip holding down the clear button for three seconds should be resetting the console password. This is only possible when the frontpanel buttons are not protected.

 

Occasional Contributor I

Re: Accessing HP 5412zl by console

can you tell me what is default username and password of this switch to access by console ?

Re: Accessing HP 5412zl by console

By default there is NO username and password, you should just get access to the console with full manager rights.

If you used the 'setup' command for initial configuration, it asks for a password and will set that to the username: manager. So if you have a clue what password could be set, you might try that with username "manager".

 

If you don't know the password, follow the reset procedure (that removes the configuration): http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=mmr_kc-0127335

.. and you may need to wait 25 seconds instead of 5 for the 5412zl according to http://h20566.www2.hpe.com/hpsc/doc/public/display?sp4ts.oid=5179499&docLocale=en_US&docId=emr_na-c02597269

 

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: