Wireless Access

Reply
fmo
Contributor I

Adding a Guest User with Limited bandwidth access

Hello,

 

I would like to add a new guest user and be able to limit his speed. Is that possible? How can that be achieved on the Mobility controller?

 

Regards,

fmo

Re: Adding a Guest User with Limited bandwidth access

Absolutely!  In the guest role you create, you can assign a bandwidth contract. 

 

See below

 

1. Configure the bandwidth contract in Configuration --> Advanced Services/Stateful Firewall --> BW Contracts (tab at top right)

 

Screen Shot 2013-08-30 at 8.58.47 AM.png

 

2. Add that bandwidth contract to the guest role.  I would make it per user and not per role.  Note...the shot below is from 6.3 but the workflow is similar.  The screen below will look different in older code.

 

Screen Shot 2013-08-30 at 8.59.24 AM.png

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
fmo
Contributor I

Re: Adding a Guest User with Limited bandwidth access

If am using the default role, then all i have to do is edit the role *guest* right?

Occasional Contributor II

Re: Adding a Guest User with Limited bandwidth access

do we need pefng licenses for applying bandwidth contract?

Guru Elite

Re: Adding a Guest User with Limited bandwidth access

Yes.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: