Wireless Access

Regular Contributor II
Posts: 219
Registered: ‎10-09-2009

Adding another DHCP scope

We have to add another DHCP scope because we are running out of IP's. I cannot just change the sbunet mask on the existing one because some of the devices had to be statically assigned.  I added the VLAN to the VAP so both the old and new VLANs are listed. To make matters a little more difficult we use DHCP Reservations to assign the other devices. I tested it by reserving an IP in the new VLAN, but it gets one from the old one. Any ideas?

Guru Elite
Posts: 8,321
Registered: ‎09-08-2010

Re: Adding another DHCP scope

Wireless + DHCP reservations + multiple subnets doesn't mix well.

You should try creating user derived rules for those Mac addresses to assign the appropriate VLAN.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Search Airheads
Showing results for 
Search instead for 
Did you mean: