Wireless Access

last person joined: 21 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Air Monitor and IDS

This thread has been viewed 3 times

  • 1.  Air Monitor and IDS

    Posted Feb 26, 2013 10:25 AM

    Hello,

     

    I am using Aruba OS 6.1 and I have some questions:

     

    1. Is the receive sensitivity threshold parameter in the 802.11a/g radio settings basically control the RX sensitivity of the radio?

    2. Is the receive sensitivity parameter applicable to both AP and AM mode radios?

    3. When an IDS signature is added, where can I set the containment method used when a specific signature is found? Is this contained automatically based on the containment method under the IDS general profile?

     

    Thanks.



  • 2.  RE: Air Monitor and IDS

    Posted Mar 04, 2013 06:50 PM

    I'm 90% sure the answer to all 3 is yes. Would be good to get a second opinion though!