Wireless Access

Reply
Occasional Contributor I

Airmatch Questions

We have 4 controllers configured in 2 clusters in seperate buildings managed by a virtual Aruba Mobilty Master. We have Airmatch enabled. Will airmatch be able to mange RF for both buildings without be configured to know the buildings are separte. I guess a better whay to ask this is does all the data Airmatch uses to caluclate RF plans claclualted across all locations or does it consisder the location during the claculations. Thanks

Guru Elite

Re: Airmatch Questions

Yes. Airmatch primarily uses neighbor information to make calculations and determine what is next to what. The two buildings will be in different "partitions".
******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Occasional Contributor I

Re: Airmatch Questions

Do I need to create the partitions or is that done automatically by Airmatch?

Guru Elite

Re: Airmatch Questions

Automatically. There is nothing to configure.
******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: