Wireless Access

Reply
Contributor I
Posts: 21
Registered: ‎10-30-2012

Alert messages on Local controllers

On each of my local controller I am seeing alerts that various VLANs do not exist. These VLANs are not required for fall back to the locals. All VLANs are showing in my Master and no alerts on it.

How can I remove theses alerts from the Locals? Any way other than to add these un needed VLANs to the locals?

 

thx,

l

 

MVP
Posts: 4,238
Registered: ‎07-20-2011

Re: Alert messages on Local controllers

 

 

If you run the following command :

 

#show profile-errors

Invalid Profiles
----------------
Profile Error
-------         -----

 

It will let you know what general config that was pushed from the master controller but that the particular VLAN 10 exist on local1 sbut it doesn't exist in local2 and then you will see these type of errors, unfortunately those can't be removed.

 

wlan virtual-ap "test1" VLAN 10 does not exist

 

Thanks

Vic

 

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
Showing results for 
Search instead for 
Did you mean: