Wireless Access

Reply
Contributor I
Posts: 29
Registered: ‎06-04-2012

Are there any issues running AP225 in 6000 chassis with m3 card with 6.3 version

Hello

 

If i upgrade the 6000 controller with m3 card to version 6.3 and use AP225, are there any known issues/limitations?

In other words are there any limitations using AP225 with 6000 controller M3 card with 6.3 version Versus AP225 working in 7000 series controller?

 

Thanks

Harry

MVP
Posts: 1,409
Registered: ‎05-28-2008

Re: Are there any issues running AP225 in 6000 chassis with m3 card with 6.3 version

[ Edited ]

Not as far as i aware. (M3 supporting AP224/5 usage same as 7XXX series)  as long as u on 6.3.X.X.

 

If u want to be on the safe side - while starting to deploy AC units,start upgrading your infrastructure to 10gb ports/switches (802.3at).

 

Me.

 

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
Super Contributor I
Posts: 300
Registered: ‎12-01-2010

Re: Are there any issues running AP225 in 6000 chassis with m3 card with 6.3 version

No issue with the M3K with AP225, my customer is deploying it and is fine with the latest firmware.

Normal Guy
MVP
Posts: 1,409
Registered: ‎05-28-2008

Re: Are there any issues running AP225 in 6000 chassis with m3 card with 6.3 version

Same here - have no issues - working as needed.

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
Search Airheads
Showing results for 
Search instead for 
Did you mean: