Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Aruba 3200 WLC QoS Policing

This thread has been viewed 0 times

  • 1.  Aruba 3200 WLC QoS Policing

    Posted Sep 19, 2014 11:53 AM

    Hello Experts,

     

    I have a network build of 2 WLCs (running master/local mode) and 2 APs.

     

    I want to have 3 different SSIDs and I want to police the data rate for each of those SSIDs to a different value (Mb/s)

     

    Is that possible withing the Aruba 3200 series. I have check all of the QoS options in the box but I am not seeing that.

     

    I am no Aruba expert so I might be looking in the wrong place.

     

    Regards


    #3200


  • 2.  RE: Aruba 3200 WLC QoS Policing
    Best Answer

    Posted Sep 19, 2014 12:18 PM

    You can do this from the user-role or per user , this will work if you assign a different role based on the VAP / SSID Profile

    2014-09-19 12_20_16-Security User Roles.png



  • 3.  RE: Aruba 3200 WLC QoS Policing

    Posted Sep 19, 2014 12:20 PM

    And you can also allocate a certain pergentage based on the VAP of the available BW

    2014-09-19 12_18_25-All Profile Management.png



  • 4.  RE: Aruba 3200 WLC QoS Policing

    Posted Sep 19, 2014 12:37 PM

    Hey Fabian,

     

    Great man :) I have sent you a message.

     

    Thanks so much!



  • 5.  RE: Aruba 3200 WLC QoS Policing

    Posted Jan 07, 2015 02:02 AM

    Is it the percentage of controller Bandwith for the corresponding vlan or does the bandwith refere to bandwith of individual ap?

     

    I want to limit our guestuser e.g. 20% of WAN bandwith.