Wireless Access

Reply
New Contributor

Aruba 3200 WLC QoS Policing

Hello Experts,

 

I have a network build of 2 WLCs (running master/local mode) and 2 APs.

 

I want to have 3 different SSIDs and I want to police the data rate for each of those SSIDs to a different value (Mb/s)

 

Is that possible withing the Aruba 3200 series. I have check all of the QoS options in the box but I am not seeing that.

 

I am no Aruba expert so I might be looking in the wrong place.

 

Regards

Re: Aruba 3200 WLC QoS Policing

You can do this from the user-role or per user , this will work if you assign a different role based on the VAP / SSID Profile

2014-09-19 12_20_16-Security User Roles.png

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA

Re: Aruba 3200 WLC QoS Policing

And you can also allocate a certain pergentage based on the VAP of the available BW

2014-09-19 12_18_25-All Profile Management.png

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
New Contributor

Re: Aruba 3200 WLC QoS Policing

Hey Fabian,

 

Great man :) I have sent you a message.

 

Thanks so much!

Frequent Contributor I

Re: Aruba 3200 WLC QoS Policing

Is it the percentage of controller Bandwith for the corresponding vlan or does the bandwith refere to bandwith of individual ap?

 

I want to limit our guestuser e.g. 20% of WAN bandwith.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: