Wireless Access

Reply
Frequent Contributor II
Posts: 105
Registered: ‎04-15-2013

Aruba 3400 Controller OS Jump

I have a 3400 controller running 5.0.2.1, can I jump directly to 6.1.3.8 with out issue?

 

Thanks,

 

Brandon

Guru Elite
Posts: 8,335
Registered: ‎09-08-2010

Re: Aruba 3400 Controller OS Jump

[ Edited ]

You should upgrade to 5.0.4.9 prior to upgrading to 6.1.3.8.

 

If you have RAPs, make sure you read page 13 (82) of the release notes (attached).

 


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor I
Posts: 6
Registered: ‎10-27-2010

Re: Aruba 3400 Controller OS Jump

Thanks

Frequent Contributor II
Posts: 105
Registered: ‎04-15-2013

Re: Aruba 3400 Controller OS Jump

Thanks for the quick response.  Would you recommend putting a different OS on the controller?  Say 6.2.1.3?

 

 

Guru Elite
Posts: 8,335
Registered: ‎09-08-2010

Re: Aruba 3400 Controller OS Jump

6.2.1.3 came out today so I personally can't recommend it yet, but 6.2.1.2
was very stable.

Do you need AirGroup functionality? 6.3 has been out for a few weeks as
well. It has ClientMatch, which is part of the next generation of ARM.


Sent from my BlackBerry Z10

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor I
Posts: 6
Registered: ‎10-27-2010

Re: Aruba 3400 Controller OS Jump

Thanks for the info on the RAP's, might have missed that one on my upgrade. 

Aruba
Posts: 1,368
Registered: ‎12-12-2011

Re: Aruba 3400 Controller OS Jump

6.3.0.1 also came out today
Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Search Airheads
Showing results for 
Search instead for 
Did you mean: