Wireless Access

last person joined: 12 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Aruba 3400 not able to Ping a Server

This thread has been viewed 0 times

  • 1.  Aruba 3400 not able to Ping a Server

    Posted May 24, 2014 10:44 AM

    I have aruba 3400 controller with 140 AP's configured in RAP mode.

     

    Yesterday we had a power outage and the controller got restarted, after which it is not able to ping one particular IP of local wired PC.

     

    The controller was able to access this PC before the power outage.

     

    However the system is still able to ping the controller, but controller could'nt.


    If i restart the controller then controller is able to ping that system and may be after 6 hrs again the issues starts.

    If i change the system IP the controller is able to ping the new IP.


    #3400


  • 2.  RE: Aruba 3400 not able to Ping a Server

    EMPLOYEE
    Posted May 24, 2014 12:22 PM

    We are missing alot of detail on your post.  That could happen if you have another device with the same ip address.

     

    EDIT:  To test for this, type "clear arp" on the controller when this happens and then try to ping the host again.