Wireless Access

Reply
Occasional Contributor II
Posts: 23
Registered: ‎12-14-2009

Aruba 3600 controller - Proxy port config question.

Hi 

I have an Aruba 3600 controller running 6.2.1.2.

I have a public access WLAN setup.  Once connected the user needs to add the ip of my proxy on port 805 in the proxy settings before they are redirected to the Web Portal page.  This all works fine.

 

I have a new SSID setup and I can connect to it no problem, but again only if I use the proxy ettings above.  I would like to use port 4000 instead of port 805, does anyone know where I can set this on the Aruba?

MVP
Posts: 1,110
Registered: ‎10-11-2011

Re: Aruba 3600 controller - Proxy port config question.

You need to create a firewall policy that allows your guests to connect to the IP address of your proxy (destination) on port 4000 (service).  You can do this by going to Configuration > Access Control > Policies.  Once added, go to Configuration > Access Control > User Roles.  Click on the role your guests have and add the new firewall policy.  Alternatively, you can just modify the existing firewall policy that allows port 805.

=======================================
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.
Occasional Contributor II
Posts: 23
Registered: ‎12-14-2009

Re: Aruba 3600 controller - Proxy port config question.

many thanks, I wasn't far off, I didn't spot that it only displays 10 policies at a time and I had 4 pages to work through.

 

cheers.

Search Airheads
Showing results for 
Search instead for 
Did you mean: