Wireless Access

Reply
Frequent Contributor II

Aruba 7010 voltage input

I can't find any specifics on this by checking data sheets, but maybe my search powers are struggling today.  I'm planning on building out an office space with 2x Aruba 7010 controllers, but the PDU's we are bringing in are 220v rated.  The exact model appears to be a JW681A.

 

Can anyone help me determine if this support higher voltages, or if I need a step down transformer to not fry these controllers out? 

rwin = 0

Re: Aruba 7010 voltage input

All AC powered controllers have a universal voltage PSU - please see below excerpt from the hardware install guide.

 

(https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Command/Core_Download/Default.aspx?EntryId=26041)

 

7010 Specifications

Physical
 Device Dimensions (without mounting brackets) (HxWxD): 1.74” x 12.75” x 13.0” (4.42 cm x 31.75 cm x33.0 cm)
 Device Weight: 7.4 lbs (3.4 kg)

Power Supply Specifications
 225W AC Power Supply
 AC Input Voltage: 100 VAC to 240 VAC <<<<<
 AC Input Current: 3.5 A max.
 AC Input Frequency: 50 to 60 Hz

Operating Specifications
 Operating Temperature Range: 0 °C to 40 °C (32 °F to 104 °F)
 Operating Humidity Range: 5% to 95% (RH), non-condensing

Storage Specifications
 Storage Temperature Range: 0 °C to 50 °C (32 °F to 122 °F)
 Storage Humidity Range: 5% to 95% (RH), non-condensing
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: