Wireless Access

Reply
Contributor II

Aruba 7210 controller port-channel

Hello Airheads,

do you know f you can bundle all 6 ports on a 7210 controller into a 6 port etherchannel.

Thereby making a 6 Gigabit etherchannel (port-channel)

cheers

pete

 

Occasional Contributor I

Re: Aruba 7210 controller port-channel

Maybe.  You can have up to 8 member ports in a port-channel, but they all must be the same speed.  So if you're running the four SFP+ ports at 10Gb, then you could only have those 4 ports in the port-channel.

Contributor II

Re: Aruba 7210 controller port-channel

thank you for your reply.

we are planning to run all 6 ports @ the same speed yes.

So that would mean the four SFP's running @ 1 gigabit and the

two dual personality ports at 1 gigabit.

hopefully that would be ok?

pete

 

Occasional Contributor I

Re: Aruba 7210 controller port-channel

Yes, you should be fine with that configuration. JJ


#AirheadsMobile
Contributor II

Re: Aruba 7210 controller port-channel

hello JJ,

I Have managed to get a 7210 controller and tried to add the 10 gigabit

ports into a port channel that i already had added the 1 gigabit ports to and i get an error message saying "member 0/0/2 speed doesn't match Pc-1 speed".

 

Contributor II

Re: Aruba 7210 controller port-channel

hello again,

i am beginning to think it's not an option to have the 2 x 1gigabit ports and the 4 x 10gigabit SFP ports in the same port channel.

Thanks for having a look though appreciate you taking the time JJ.

CHEERS

PETE

 

Occasional Contributor I

Re: Aruba 7210 controller port-channel

Hi Pete, What if you set the speed on the SFP+ ports to 1Gbps first? then try to add to the port-channel? Best, JJ


#AirheadsMobile
Guru Elite

Re: Aruba 7210 controller port-channel


pete_elms wrote:

hello again,

i am beginning to think it's not an option to have the 2 x 1gigabit ports and the 4 x 10gigabit SFP ports in the same port channel.

Thanks for having a look though appreciate you taking the time JJ.

CHEERS

PETE

 


The media in a port channel must be the same..



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Guru Elite

Re: Aruba 7210 controller port-channel


jjtriv wrote:
Hi Pete, What if you set the speed on the SFP+ ports to 1Gbps first? then try to add to the port-channel? Best, JJ


#AirheadsMobile

You cannot, unfortunately.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor I

Re: Aruba 7210 controller port-channel

Thanks for the confirmation, Colin!


#AirheadsMobile
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: