09-11-2013 07:51 AM
I want to configure my current mesh AP to service the WL client as well (Access point mode) So this AP will be acting as both Mesh AP and also servicing the wireless clients.
Please share any sample configuration or an idea on how to do this will be of great help.
09-11-2013 10:48 AM
1- Create a Mesh Cluster and Radio profile
2 - Then apply this profile to the AP-Group you will use for the mesh setup
3 - Select the AP you want to use for a Mesh portal
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
09-11-2013 07:11 PM
Thanks for the input. I have the mesh configured. Now i want this ap to service the wireless clients as well. Like the usual AP. Do i hav to just create another profile and map it to the this AP group ?
09-12-2013 03:38 AM
Select one ap from the list and provision it as a mesh portal. This is the ap that will accept the mesh ap's traffic to dump it on your LAN.
Next select another AP as the mesh point. Once done, it will reboot and try to be a mesh ap. Simply deploy it where needed. This ap should form a mesh link to the portal and also serve clients.
Consulting Systems Engineer - ACCX, ACDX, ACMX
If you found my post helpful, please give kudos