Wireless Access

Reply
Contributor I
Posts: 28
Registered: ‎11-23-2011

Aruba Commands

I'm running a show ap arm state to check the neighbor Ap's

 

 

Theres a tab that states Neighbor Density? What exactly does this Tab mean?

 

 

 

MVP
Posts: 1,111
Registered: ‎10-11-2011

Re: Aruba Commands

[ Edited ]

From the ArubaOS Command Reference Guide, page 603:

 

Neighbor Density The neighborhood density for the specified AP is listed with the values A/B/C/D,
where:
A= Number of the AP’s clients heard in the AP neighbor’s client list
B= Number of clients in AP neighbor’s client list
C= Density percentage, (AP clients heard in in the AP neighbor client list / AP client density * 100).
D= Density Percentage (AP clients heard in the AP neighbor’s client list /neighbor client density * 100)

 

=======================================
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.
Search Airheads
Showing results for 
Search instead for 
Did you mean: