02-05-2013 06:53 AM
I have a Problem with upgrading this controller. :smileyfrustrated:
Already SW-Version 220.127.116.11 is running on partition 1 , Now i want to do a upgrade to version 18.104.22.168.
But it is not working,
The failure is : disk space is full.
With the show storage command i can see this :
(OAW-4306G) #show storage
Filesystem Size Used Available Use% Mounted on
none 300.0M 1.5M 298.5M 1% /tmp
/dev/mtdblock11 156.0M 126.2M 29.8M 81% /flash
/dev/mtdblock9 50.0M 40.2M 9.8M 80% /mnt/img0
/dev/mtdblock10 50.0M 44.8M 5.2M 90% /mnt/img1
In the RN is is written that i need at least 75MB of free space to do the upgrade.
What is necessary for a functional Upgrade ?
Thank you for your help !
02-05-2013 10:50 AM
In your case you have 29MB free on the flash. You'll need to remove any unnecessary files. From the CLI, run dir to see what files are on the flash; and their sizes. Remove or copy off what you can to free up some space. I am not positive on all the pertinent files to leave, but remove any crash files, logs.tar, backup configs, AP tech-support logs, etc.
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX
02-06-2013 12:21 AM
I have already deleted all possible files.
The only way to install the newest SW on partition 1 was to downgrade part. 0 to 22.214.171.124 !
But that should not be the only way to do that !