Wireless Access

Reply
Occasional Contributor II
Posts: 22
Registered: ‎12-23-2013

Aruba OS 6.3.1.3 issue with regulatory domain

 

 

I recently updated Aruba controller 3200 to the latest 6.3.1.3 OS, however after the reboot some APs has turned to Air monitor mode and showing Domain missmatch flag.

 

Downgrading back to 6.1.3.12 OS the APs went back to AP mode, does anyone has any idea why this issue is happening only on the latest OS and what would be the solution to force those APs to AP mode instead of Air monitors.

Aruba
Posts: 1,285
Registered: ‎08-29-2007

Re: Aruba OS 6.3.1.3 issue with regulatory domain

What domain are they configured for?


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACMP, ACMX #294
mclarke@arubanetworks.com
Occasional Contributor II
Posts: 22
Registered: ‎12-23-2013

Re: Aruba OS 6.3.1.3 issue with regulatory domain

The AP profile is configured for US domain

Aruba Employee
Posts: 148
Registered: ‎11-25-2009

Re: Aruba OS 6.3.1.3 issue with regulatory domain

Let us know the AP modal and the country code of the controller and regulatory domain country code. 

 

also try 

 

#show ap allowed-channels ap-name <name of ap>

   or  

# show ap allowed-channels country-code <Code> ap-type <AP> 

 

#  Show ap details adv ap-name <name>

 

Vinod Kumaar AVM ACMX, ACDX
Principal Network Engineer
Customer Advocacy | Aruba Networks Inc.

Did something you read in the Community solve a problem for you? If so, click "Accept as Solution" in the bottom right hand corner of the post.
Frequent Contributor I
Posts: 64
Registered: ‎11-10-2009

Re: Aruba OS 6.3.1.3 issue with regulatory domain

# show ap allowed-channels country-code <Code> ap-type <AP>

 

Thanks for this command -- very useful!

 

We have some AP-103Hs and couldn't get them working on a 620 controller running 6.4.1.0 - this command showed an empty list for that model in the GB regulatory domain.  The AP booted but remained in AirMonitor mode (because no channels were available).

 

Upgrading the 620 to 6.4.2.0 gives a full list and and the AP-103H springs into life properly, in regular AP mode.  Looking more closely at the 6.4.2.0 release notes, support for this AP in the United Kingdom (= GB) area was only added then, requiring that as a minimum release.

 

[I also note that 6.4.2.0 adds support for separate updating of the regulatory domain, not requiring new ArubaOS releases.]

Search Airheads
Showing results for 
Search instead for 
Did you mean: