Wireless Access

Reply
Occasional Contributor I

Aruba OS 8 Airmatch 24 hour change period

Im aware that by defaut Airmatch changes are pushed dynamically every 24 hours.

 

What happens when intererence or a high number of clients are introduced to an enviorment in the middle of the day unpredicted?

 

How can my enviorment adjust on the fly without ARM ?

Re: Aruba OS 8 Airmatch 24 hour change period

I've had a look at the documentation and it states:

 

An exception to this daily update is an automatic channel change due to a radar detection event or high noise interference. If an AP detects a radar event on its current operating channel, that AP automatically changes to another supported channel to avoid radar interference, and does not wait for the daily RF configuration update from the Mobility Master. An AP may also automatically change channels if a very high noise level is detected on the current channel, if at least one other channel is free of noise. 


ACMA, ACMP, ACSA
If my post addresses your query, give kudos:)

Re: Aruba OS 8 Airmatch 24 hour change period

Think of environmental triggers being still based on the previous ARM settings, but AirMatch handles the globla RF settings/picture. 

Jerrod Howard
Sr. Technical Marketing Engineer

Re: Aruba OS 8 Airmatch 24 hour change period

Hi Jerrod,
Are those changes only apply to location (Aps) that is experiencing that High Noise or Radar ?
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA

Re: Aruba OS 8 Airmatch 24 hour change period

Correct, when RF noise, interference, or DFS triggers occur or thresholds are exceeded per AP. 

Jerrod Howard
Sr. Technical Marketing Engineer
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: