So, here I am, trying simply to attach my own captive-portal profile to a user-role in ArubaOS 8 but failing miserably.
If someone could comment on where I'm going wrong, that would be appreciated. If this is simply not possible anymore, my next question will be: "WHY NOT?!".
So here's my very simple setup:
(ArubaMM-VA) [md] #show configuration node-hierarchy
Default-node is not configured. Autopark is disabled.
Configuration node hierarchy
----------------------------
Config Node Type Name
----------- ---- ----
/ System
/md System
/md/00:1a:1e:11:11:11 Device md2
/md/00:1a:1e:22:22:22 Device md1
/mm System
/mm/mynode System
I start with the default captive-portal profile,
(md1) # show running-config | beg "user-role guest-logon"
user-role guest-logon
captive-portal "default"
access-list session ra-guard
access-list session clearpass-portal
access-list session logon-control-guest
access-list session captiveportal
access-list session v6-logon-control
access-list session captiveportal6
!
but want to change this to my own custom one to save on autogenerated profiles etc
I created guest_selfreg for this purpose:
md1) #show aaa authentication captive-portal
Captive Portal Authentication Profile List
------------------------------------------
Name References Profile Status
---- ---------- --------------
default 1
guest_selfreg 0
And here is me trying to attach this captive-portal to the guest-logon role:
(ArubaMM-VA) [mynode] #cd /md
(ArubaMM-VA) [md] #
(ArubaMM-VA) [md] #configure terminal user-role guest-logon
(ArubaMM-VA) [md] (config-submode)#captive-portal guest_selfreg
(ArubaMM-VA) [md] (config-submode)#write memory
But, nothing seems to happen.
(md1) # show running-config | beg "user-role guest-logon"
user-role guest-logon
captive-portal "default"
access-list session ra-guard
access-list session clearpass-portal
access-list session logon-control-guest
access-list session captiveportal
access-list session v6-logon-control
access-list session captiveportal6
!
From the GUI I can't seem to get passed that captive-portal wizzard either.
So how to I apply my own captive-portal profile to the guest-logon role?
Shouldn't be that difficult right? So what am I missing?