Wireless Access

Reply
Contributor I
Posts: 152
Registered: ‎10-26-2016

Backup LMS ip not reflected in "show ap database" for mesh node APs

My setup is fairly simple. The Ap groups are mapped with "default"  AP system profile and in the "default" AP system profile have defined the primary and backup LMS IPs.

However when I issue "show ap database" I do not see the Standby IP reflected for the back up LMS configured in the AP system profiles for the Mesh node APs(Mesh Portals and Mesh points).

What should I do to make sure the "standby IP" is reflected with "backup LMS IP" for the Mesh node IPs?

 

(WLC_0002) #show ap database

AP Database
-----------
Name        Group         AP Type  IP Address      Status         Flags  Switch IP    Standby IP
----       -----         -------  ----------      ------          -----  ---------    ----------
XXXXXXXXX5   Indoors  103      172.25.98.12    Up 1d:3h:38m:59s    2      10.200.0.12  10.200.0.11
XXXXXXXXX4   Indoors  135      172.25.106.19   Up 1d:3h:39m:3s     2      10.200.0.12  10.200.0.11
XXXXXXXXX3   Indoors  135      172.25.106.26   Up 1d:3h:39m:3s     2      10.200.0.12  10.200.0.11
XXXXXXXXX2   Portals  274      172.25.44.5     Up 1d:3h:45m:55s    M2     10.200.0.12  0.0.0.0
XXXXXXXXX1   Portals  274      172.25.44.7     Up 1d:3h:45m:56s    M2     10.200.0.12  0.0.0.0
XXXXXXXXX6   Portals  274      172.25.44.6     Up 1d:3h:45m:55s    M2     10.200.0.12  0.0.0.0
 

Aruba Employee
Posts: 240
Registered: ‎03-26-2013

Re: Backup LMS ip not reflected in "show ap database" for mesh node APs

Hi Adnan,

 

The High Availability Fast Failover feature supports APs in campus mode using tunnel, decrypt-tunnel, or bridge forwarding modes. This feature is not supported on remote APs and mesh APs in any mode.

 

This is part of 6.4/6.5 UG as well.

Contributor I
Posts: 152
Registered: ‎10-26-2016

Re: Backup LMS ip not reflected in "show ap database" for mesh node APs

Hi Nitesh,

 

Thank you for the prompt response.

 

Apart from the high availability feature: Is it expected of the Master controller to reflect the radio summary/Network summary of All the APs (normal and Mesh node APs) that are up even on the  Local controller?

 

Or the Master will no reflect the radio/Network summary of Mesh node and Remote APs?

 

 

 

 

Aruba Employee
Posts: 240
Registered: ‎03-26-2013

Re: Backup LMS ip not reflected in "show ap database" for mesh node APs

Hi Adnan,

 

We can view them from Master controller's Web UI

 

Web UI-->Monitoring-->Network

 

It allows you to view All AP's,RAP's Mesh nodes etc

Contributor I
Posts: 152
Registered: ‎10-26-2016

Re: Backup LMS ip not reflected in "show ap database" for mesh node APs

Hi Nitesh,

 

Thanks again for the prompt response.

 

Today I ran into an issue that the Master stop reflecting the statuses of Mesh node APs. Is there a bug in 6.5.0.2?

 

http://community.arubanetworks.com/t5/Wireless-Access/Master-controller-s-quot-network-summary-quot-page-stopped/td-p/289806

Search Airheads
Showing results for 
Search instead for 
Did you mean: