Wireless Access

Reply
Contributor I

Bandwidth Contract based on SSID | Aruba 7010 & AP-325

Hi,

 

Aruba 7010 WLC (ArubaOS 6.5.4.3, Build No: 61595)

 

we are planning to limit bandwidth based on SSID.

we have two SSID (SSID--1 for office with psk, SSID-02 for Open internet access).

we need to limit the maximum upload (10Mbps) & Download (25 Mbps) for SSID-02, how can we achieve this.

 

 

 

Re: Bandwidth Contract based on SSID | Aruba 7010 & AP-325

Contributor I

Re: Bandwidth Contract based on SSID | Aruba 7010 & AP-325

Thanks zalon0 for quick response.

we will check this and update you.

Contributor I

Re: Bandwidth Contract based on SSID | Aruba 7010 & AP-325

hi zalion0, we are looking for bandwidth contrat based on SSID (Maximum bandwidth utilization for Guest SSID is 10 Mbps, its a shared bandwidth for all connected users).

so as per your advice we need to configure "Proportional BW Allocation" on particular VAP profile (http://www.arubanetworks.com/techdocs/ArubaOS_6_5_4_X_Web_Help/Web_Help_Index.htm#ArubaFrameStyles/ARM/Traffic_Shaping.htm?Highlight=traffic) am i correct.

 

Re: Bandwidth Contract based on SSID | Aruba 7010 & AP-325

In that case I would suspect you need to configure this under the User Role, so apply a bandwidth contract on a Per Role basis so that the Max Limit is 10Mbps per User Role not Per User.


ACMA, ACMP, ACSA
If my post addresses your query, give kudos:)
Contributor I

Re: Bandwidth Contract based on SSID | Aruba 7010 & AP-325

Sorry pls help me to clear.

 

on Post Auth Role we need to apply the bw restriction.

pls refer the attachemnt.

Re: Bandwidth Contract based on SSID | Aruba 7010 & AP-325

Correct, this will be the role that the user is assigned after any form of authentication. Don't forget to test it :)


ACMA, ACMP, ACSA
If my post addresses your query, give kudos:)
Contributor I

Re: Bandwidth Contract based on SSID | Aruba 7010 & AP-325

Thanks man.....

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: