Wireless Access

Reply
Contributor I
Posts: 44
Registered: ‎03-10-2014

Bandwidth contract per user doesn't work

Dear all experts,

I'm implementing aruba controller 7010 and due to a lot of clients are using our wireless. So my customer want me to limit bandwidth per user. For my configuration, i have many user role on one SSID 802.1x. And each user role , i create bandwidth contract profile such downstream_10M , upstream_5M, and assigned to that role with "per user". However when i tested with "speedtest.net" by each user of each role. Such user1/role1 , can work with bandwidth contract, but the remaining users (such user2/role2, user3/role3, user4/role4 , user5/role5) can't work with bandwidth contract. My AOS version is 6.4.2.3.

Anyone please advice me how to solve it? Or usually bandwidth contract can't work with "per user".

 

Thanks

Guru Elite
Posts: 21,258
Registered: ‎03-29-2007

Re: Bandwidth contract per user doesn't work

That should work.  Please open a TAC case so they can replicate your issue.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: