Wireless Access

Reply
Contributor I

Brand New AP-205, AP-105 and AP-175

I have never configured a brand new factory defaulted AP before & I'm not certain how to get them to register to the right controller apart from the controller GUI? I have 4 controllers that an AP could communicate with when it is plugged into a switch. How do I make a new AP register to the controller of my choice?

 

When I make configuration changes today with these types of AP's. I see that there is a setting in the controller to point these AP's to the IP address of the controller you want them to register to.

 

InkedAP Config_LI.jpg

 

Guru Elite

Re: Brand New AP-205, AP-105 and AP-175

Please read the chapter here:  https://www.arubanetworks.com/techdocs/ArubaOS_83_Web_Help/Web_Help_Index.htm#ArubaFrameStyles/AP_Config/AP_Discovery_Logic.htm


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: