Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Bridge Mode ( Campus APs ) Can you use the other port for the bridge traffic?

This thread has been viewed 0 times

  • 1.  Bridge Mode ( Campus APs ) Can you use the other port for the bridge traffic?

    Posted Nov 28, 2011 03:51 PM

    I am testing in my lab bridge mode, I have it working with .1q  tagging the bridge traffic off port 0/0, but can I send the bridge traffic to port 0/1 but still use port 0/0 for management?

     

    Q.



  • 2.  RE: Bridge Mode ( Campus APs ) Can you use the other port for the bridge traffic?
    Best Answer

    Posted Nov 28, 2011 04:00 PM

    If you set the VLAN on the port (via the wired port profile), you can bridge WLAN clients to it by putting them in that same VLAN and they will be bridged out port 1.

     

    This will work with port 1 in access or trunk mode (as long as the port carries the VLAN the user is in).