Wireless Access

Reply
QLD
Occasional Contributor II
Posts: 14
Registered: ‎07-21-2011

Bridge Mode ( Campus APs ) Can you use the other port for the bridge traffic?

I am testing in my lab bridge mode, I have it working with .1q  tagging the bridge traffic off port 0/0, but can I send the bridge traffic to port 0/1 but still use port 0/0 for management?

 

Q.

Aruba Employee
Posts: 664
Registered: ‎04-15-2009

Re: Bridge Mode ( Campus APs ) Can you use the other port for the bridge traffic?

If you set the VLAN on the port (via the wired port profile), you can bridge WLAN clients to it by putting them in that same VLAN and they will be bridged out port 1.

 

This will work with port 1 in access or trunk mode (as long as the port carries the VLAN the user is in).

Search Airheads
Showing results for 
Search instead for 
Did you mean: