Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

CAP/RAP CLI traceroute

This thread has been viewed 0 times

  • 1.  CAP/RAP CLI traceroute

    Posted Mar 09, 2018 10:53 AM

    Hi all!

     

    Is it possible to do a traceroute from a CAP or RAP CLI?

    Thank you!

     

     

     



  • 2.  RE: CAP/RAP CLI traceroute
    Best Answer

    MVP EXPERT
    Posted Mar 09, 2018 11:24 AM

    Hey, you can perform a traceroute from the AP if you have a console cabkle attached. You will need to break the prompt (esc + ctrl + k)

     

    ~ # Switching to Full Access
~ #
~ # traceroute 8.8.8.8
traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 38 byte packets
 1  ** *

    The above may also be possible if you have Telnet enabled in the AP System Profile and also via the Backup ESSID.



  • 3.  RE: CAP/RAP CLI traceroute

    Posted Mar 10, 2018 09:52 AM
    Hi!

    Thank you, works....