Wireless Access

Reply
cdj
Contributor I
Posts: 72
Registered: ‎07-17-2013

CP-redirect

We have a standalone master setup (6000 M3 w/ 6.3.1.9 FIPS AOS) and the cp-redirect address is IP address of the standalone controller. As more user connect to the wireless the slower the captive-portal response is and accessing the controller via WebUI is very very slow. My question is since we're not using ClearPass do I need the cp-redirect address configuration? Also, is there something I can do about the slowness of the controller WebUI access as more useers connect to the wireless.

 

Thanks. 

MVP
Posts: 4,269
Registered: ‎07-20-2011

Re: CP-redirect

Try this and see if it helps:

http://community.arubanetworks.com/t5/Unified-Wired-Wireless-Access/Captive-portal-slow/m-p/33721#M13786

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
cdj
Contributor I
Posts: 72
Registered: ‎07-17-2013

Re: CP-redirect

Our web-max-clients is at 60 I do not see any change. From what I've been told the cp-redirect configuration is only used if you're going to an external device like ClearPass. Since we're not using ClearPass do I need to disable the cp-redirect address configuration?

Regular Contributor II
Posts: 225
Registered: ‎10-29-2014

Re: CP-redirect

Run these command and check your controller memory & flash,

 

#show memory

#show storage

HTH
Cheers
SumaN
MVP
Posts: 4,269
Registered: ‎07-20-2011

Re: CP-redirect

https://arubanetworkskb.secure.force.com/pkb/articles/HowTo/R-1151

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
Showing results for 
Search instead for 
Did you mean: