Hi,
I have a campus ap-315, I provisioned it in my test setup on a 7010 controller running the latest code.
Later I was to move this AP to my production network to associate on an Aruba7240XM running 6.5.0.2 code.
I don't see the AP showing up on the controller. I connected the AP to the switch port which was already having an operational AP and still no luck.
What could be the possible reasons for running into this issues?
Local Intf: Gi1/0/47
Chassis id: 703a.0ec1.b2ae
Port id: 703a.0ec1.b2ae
Port Description: bond0
System Name - not advertised
System Description:
ArubaOS (MODEL: 315), Version 6.5.0.2 (56901)
Time remaining: 35 seconds
System Capabilities: B,W
Enabled Capabilities - not advertised
Management Addresses - not advertised
Auto Negotiation - not supported
Physical media capabilities - not advertised
Media Attachment Unit type - not advertised
Vlan ID: - not advertised
------------------------------------------------
Local Intf: Gi1/0/48
Chassis id: 703a.0ec1.b192
Port id: 703a.0ec1.b192
Port Description: bond0
System Name: AP4
System Description:
ArubaOS (MODEL: 315), Version 6.5.0.2 (56901)
Time remaining: 33 seconds
System Capabilities: B,W
Enabled Capabilities: W
Management Addresses:
IP: 172.25.42.17
Auto Negotiation - supported, enabled
Physical media capabilities:
1000baseT(FD)
100base-TX(FD)
100base-TX(HD)
10base-T(FD)
10base-T(HD)
Media Attachment Unit type: 16
Vlan ID: - not advertised
PoE+ Power-via-MDI TLV:
Power Pair: Signal
Power Class: Class 4
Power Device Type: Type 2 PD
Power Source: PSE
Power Priority: unknown
Power Requested: 20800 mW
Power Allocated: 20800 mW