Wireless Access

Reply
Contributor I
Posts: 151
Registered: ‎10-26-2016

Can IAP-2XX & 3XX series be configured as wireless client bridges?

My requirement is to have aruba 2XX and 3XX series IAPs to associate as "wireless client bridges" on Aruba WLAN.

Is it possible to have these series of IAPs be configured as "wireless client bridges"?

 

From the user-guide 6.5.0.0-4.3.0.0, there's no such option, excerpt from doc:


The Wi-Fi uplink is supported on all the IAP models, except for the 802.11ac IAP models (IAP-2xx Series access
points). However only the master IAP uses this uplink. The Wi-Fi allows uplink to open, PSK-CCMP, and PSKTKIP
SSIDs.

 

 

Also, for the series of IAPs that support Wi-Fi uplink, how would we determine the uplink radio mac address?

 

Guru Elite
Posts: 21,280
Registered: ‎03-29-2007

Re: Can IAP-2XX & 3XX series be configured as wireless client bridges?

[ Edited ]
If you just want to bridge wired traffic from clients to the wireless network, please see the training video here:.
http://community.arubanetworks.com/t5/Video/Instant-Training-Module-7-Mesh-Wired-Access-amp-Uplink/ta-p/289926


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: