Wireless Access

Reply
MVP
Posts: 1,110
Registered: ‎10-11-2011

Can't Add AMP Server

When attempting to add an AMP management server, I receive the following error message:

 

Module STM is busy. Please try later

 

I've tried this several times on different days and still this issue persists.

=======================================
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.
Aruba
Posts: 429
Registered: ‎05-30-2012

Re: Can't Add AMP Server

Are you referring to this command?

 

(S3500-48P-US) (config) #mgmt-?
mgmt-server             Register Mgmt Server IP Address with the controller.
                        This could be AirWave Management Server or any other
                        server that would like to receive messages from the
                        controller using AMON protocol
mgmt-user               Configure a management user.

 

The MAS does not currently use AMON to communicate with Airwave. I'll talk with engineering about hiding this command.

 

The MAS currently uses SSH/Telnet, SNMP and Syslog with Airwave.

 

Best regards,

 

Madani

MVP
Posts: 1,110
Registered: ‎10-11-2011

Re: Can't Add AMP Server

Yes, that command.

 

I'll setup SSH and SNMP, then.  Thanks.

=======================================
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.
Search Airheads
Showing results for 
Search instead for 
Did you mean: