Wireless Access

Reply
Occasional Contributor I
Posts: 6
Registered: ‎09-01-2009

Can't Provision AP-105

[ Edited ]

Hi all,

I have a pair of master controllers (3200) running in VRRP. The firmware is 6.3.1.6.

The problem is: I cant configure some APs (model 105) as RAP. I go to the "Access Points" page, select the AP that I want, the click "Provision".

In the provisioning page, I have several itens to configure, but the "Remote AP"  that I used to select does not appear, there is no option to set the AP as remote.


Anyone know why?

Thanks in advance.

Vinicius

Guru Elite
Posts: 21,252
Registered: ‎03-29-2007

Re: Can't Provision AP-105

Please upgrade to 6.3.1.7.

 

From the release notes:

 

remoteap.png

 

This also affects not being able to provision Mesh device in 6.3.1.6. This has been fixed.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor I
Posts: 6
Registered: ‎09-01-2009

Re: Can't Provision AP-105

Sorry for the late reply.

 

I did what was suggested (firmware upgrade), and it worket.

 

Thank you very much.

Search Airheads
Showing results for 
Search instead for 
Did you mean: