Wireless Access

Reply
New Contributor
Posts: 2
Registered: ‎03-21-2013

Can the configurtion of an Acess Point be changed while it is offline?

[ Edited ]

Hi,

I have some Aruba 70, 125, 135 APs and RAPs that were set up without static IPs. I would like to assign static IPs to every one of our APs. However, some of them are offline at the momenet and I cannot configure them until they come online. Once they come online, I don't want to reboot them in the middle of a user's session.

Is there a way to modify the configuration of an AP from within the 3600 Controller while it is offline and have it download that new config (i.e, static IP setting) when it becomes available?

Thanks!

Aruba
Posts: 1,643
Registered: ‎04-13-2009

Re: Can the configurtion of an Acess Point be changed while it is offline?

You cannot change provisioning settings of a Campus AP while it is offline (including setting a static IP).  There are some provisioning settings you can change on a Remote AP through the Provisioning Profiles which they'll get on connection, however static IP is not one of them.

 

You could setup DHCP reservations in the meantime until you can find a time to restart them with a static IP.

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

New Contributor
Posts: 2
Registered: ‎03-21-2013

Re: Can the configurtion of an Acess Point be changed while it is offline?

Ok, that's what I was afraid of. Thanks clembo! :cathappy:

Search Airheads
Showing results for 
Search instead for 
Did you mean: