Wireless Access

Reply
New Contributor
Posts: 3
Registered: ‎04-28-2014

Can you show on the Master Controller or RAP controllers when a RAP AP was last used?

Hi,

I have a IG Security Officer asking me about the use of RAPs and specifically when was the last time a RAP was used.

Can you show on the Master Controller or RAP controllers the last time a RAP was used?

 

Thanks

MVP
Posts: 1,401
Registered: ‎05-28-2008

Re: Can you show on the Master Controller or RAP controllers when a RAP AP was last used?

If it was in the last minutes , you will be able to see that on the controller.

in CLI

show log security 50 or 200 include mac address of your RAP/or AP Name  

show log all | include mac address of your RAP/or AP name

 

 

 

i know AirWave (if installed) was able to tell u that. (if u got AirWave installed)

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
Aruba
Posts: 1,368
Registered: ‎12-12-2011

Re: Can you show on the Master Controller or RAP controllers when a RAP AP was last used?

Can you try this command?

 

show ap details advanced ap-name <name of AP>?  

 

To show all APs (up and down), use this command:

 

show ap database

 

Now...it won't tell you a specific date and time but will give you the offset of the current time when it last heard a message from the AP.

 

For something more user friendly, AIrwave can tell you last contacted status.

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
New Contributor
Posts: 3
Registered: ‎04-28-2014

Re: Can you show on the Master Controller or RAP controllers when a RAP AP was last used?

Thanks

 

Tried this and found it shows the up time of active RAP/APs but not down / inactive RAPs/APs. We don't have Airwave unfortunately.

 

I'm out of luck then I guess?

Aruba
Posts: 1,368
Registered: ‎12-12-2011

Re: Can you show on the Master Controller or RAP controllers when a RAP AP was last used?

Actually, the command will show it...like I said...it will be an offset to the current time/date

 

AP "xxxxxx" Basic Information

----------------------------------------

Item            Value

----            -----

AP IP Address   10.79.216.241

LMS IP Address  10.79.100.104

Group           default

Location Name   N/A

Status          Down; Remote AP; CERT-based RAP

 

Rebootstraps and Control Messages Log

-------------------------------------

Recent Messages  Time now: Mon Apr 28 08:13:03 2014

---------------  ----------------------------------

Time Offset      Message details

-----------      ---------------

-545756          RCVD: HELLO len=1180 peer=10.79.216.241 seq_num=0 Not Acked

 

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
New Contributor
Posts: 3
Registered: ‎04-28-2014

Re: Can you show on the Master Controller or RAP controllers when a RAP AP was last used?

I see what you mean now thanks.

 

Maybe we haven't set something up right. Below is the config we have when I run the sho commands on our Master Controller.

 

RAP01 is down and RAP16 is up. Running the same command on the RAP Controller I get a long list of info for the RAP 16 including Reboottrap but it doesn't know about RAP01. It maybe that it hasn't been up since the last code upgrade May/June last year.

 

(GL-S40-WC01) #show ap details advanced ap-name rap01

AP "RAP01" Basic Information
----------------------------
Item            Value
----            -----
AP IP Address   1.1.1.108
LMS IP Address  10.175.167.20
Group           rap-ap-group
Location Name   N/A
Status          Down; Remote AP; CERT-based RAP
Rebootstrap:    Thu Jan  1 00:00:00 1970 - No message history


AP "RAP01" Hardware Information
-------------------------------
Item                Value
----                -----
AP Type             RAP-2WG
Serial #            AH0053052
Wired MAC Address   00:24:6c:cd:26:de
Radio 0 BSSID       N/A
Radio 1 BSSID       N/A
Enet 1 MAC Address  N/A
Enet 2 MAC Address  N/A
Enet 3 MAC Address  N/A
Enet 4 MAC Address  N/A
Enet 5 MAC Address  N/A
Enet 6 MAC Address  N/A
Enet 7 MAC Address  N/A

AP "RAP01" Radio 0 RF Plan Information
--------------------------------------
Item          Value
----          -----
Plan time     2014-04-11 13:40:01
AP Plan time  1970-01-01 00:00:00
Plan mode     N/A
Plan band     N/A
Plan channel  N/A
Plan power    N/A

(GL-S40-WC01) #show ap details advanced ap-name rap16

AP "RAP16" Basic Information
----------------------------
Item            Value
----            -----
AP IP Address   1.1.1.68
LMS IP Address  10.175.167.20
Group           rap-ap-group
Location Name   N/A
Status          Up; Remote AP; CERT-based RAP
Up time         8d:22h:47m:40s
Rebootstrap:    Thu Jan  1 00:00:00 1970 - No message history


AP "RAP16" Hardware Information
-------------------------------
Item                Value
----                -----
AP Type             RAP-2WG
Serial #            AH0050012
Wired MAC Address   00:24:6c:cd:1a:fe
Radio 0 BSSID       00:24:6c:51:af:e0
Radio 1 BSSID       N/A
Enet 1 MAC Address  00:24:6c:cd:1a:ff
Enet 2 MAC Address  N/A
Enet 3 MAC Address  N/A
Enet 4 MAC Address  N/A
Enet 5 MAC Address  N/A
Enet 6 MAC Address  N/A
Enet 7 MAC Address  N/A

AP "RAP16" Radio 0 RF Plan Information
--------------------------------------
Item          Value
----          -----
Plan time     2014-04-11 13:40:01
AP Plan time  2014-04-11 13:40:01
Plan mode     N/A
Plan band     N/A
Plan channel  N/A
Plan power    N/A

(GL-S40-WC01) #

Search Airheads
Showing results for 
Search instead for 
Did you mean: