Wireless Access

Reply
Highlighted
Contributor I
Posts: 29
Registered: ‎05-29-2012

Cannot See APs on Master Controller

Recently changed the IP address on a local controller. I have the IPsec with the new address between local and the master controller configured correctly. Communication seems to be fine except I cannot see the access points on the master controller.
MCSE +Security,
IBM Certified Advanced Systems Administrator
ACMP, ACCP
MVP
Posts: 1,422
Registered: ‎10-25-2011

Re: Cannot See APs on Master Controller

What version of AOS are you running?

Can you run "show master-local stats"

You may need to re-sync the DB between the two. I believe clearing all of the APs from the local using clear gap-db command
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Contributor I
Posts: 29
Registered: ‎05-29-2012

Re: Cannot See APs on Master Controller

AOS 6.3.1.5

MCSE +Security,
IBM Certified Advanced Systems Administrator
ACMP, ACCP
Search Airheads
Showing results for 
Search instead for 
Did you mean: