I am running into a problem trying to join a wireless network using eap-tls. I have my own CA (openssl) that I have signed certs with, I have an original cert and one the was created about a year later with the same process both signed by the same CA. When I load the original cert along with the CA cert onto an ipad I can connect. When I load the new cert on with the CA cert I get an unable to join the network.
I am not running a Radius server to the best of my knowledge. I was looking through the debug logs and it looks like everything is the same between the device authentication with the different certs up until the point that it give a IP address. The new cert gives the device a 0.0.0.0 where as the old one gives it a vaild IP address..
I also noticed when I try and load the new cert I get a mon_mgr_thread_dev_add: dev sta inst "MAC ADDRESS HERE" already exists. Is the Aruba Network storing the association of the old cert with the MAC and that is causing issues. It is also giving the device no matter what cert the same name and that is the name of the original cert.
Any information on this topic would be helpful